Division I Engaged In The Refrigeration Industry For More Than 14 Years, Mainly Engaged In TheManufacture And Sale Of Frequency Conditioner Compressors, Heat Pump Compressors, Central Air Conditioner Compressors, Air Conditioners, Heat Pump Machines, Fish Pond and Seafood Pond MachinesFor Example:Panasonic, Mitsubishi, GMCC, Gree, LG, Copeland,Danfoss, Daikin, Sanyo, Hitachi, Bitzer, Etc.These Compressors Have Multiple Certifications.

1.Supports the lssuance of ClF, FOB, DDP and Other Logistics

2.Support Multi-Product Mix and Match Purchasing

3.Recruiting Agents From Various Countries For Cooperation (Giving Resources to Local Customers)

4.Supports Payment in Various Currencies; USD, EURO, RUB, AED and Other Currencies

Bristol is produced in the United States and is mainly used in large shopping malls, factory central air conditioners, chillers and peripheral refrigeration equipment. It mainly has the following properties. The exhaust temperature must not exceed 125°C (at the exhaust pipe 150mm-200mm away from the compressor), but it must be 28°C higher than the saturation temperature corresponding to the exhaust pressure. The temperature at the center of the bottom of the casing during thermal insulation shall not exceed 107.2°C, but must be at least 28°C higher than the saturation temperature corresponding to the suction pressure. The temperature of the motor coil is measured by the resistance method, and the measured temperature shall not exceed 129.4°C. When the outdoor ambient temperature is high, the suction temperature should have a superheat degree of not less than 2.8°C, and the minimum ambient temperature should be at least -29°C, otherwise the compressor will be damaged. The maximum power-on frequency is “six on and six off” per hour.